Please note that entering keys into the receiver can lead to unexpected consequences.

When editing the receiver's system data yourself, you can reset its software settings.

If you fail to enter Biss keys, or another encoding system, we recommend that you contact a specialist to properly configure or reflash the tuner.

Recommendations for entering Biss keys into the «Strong 6125» receiver.

  • Press «MENU» on the remote control =>
  • Go to the «Installation» section =>
  • Go to the «System Setup» tab =>
  • Select «System Information» =>
  • Enter the numbers «4225» on the remote control sequentially =>
  • The key menu appears =>
  • Use the volume control buttons on the remote (vol +\-) to select BISS encoding (at the top of the screen) =>
  • Press the WHITE BUTTON on the remote control =>
  • Press the RED BUTTON (Add) on the remote control =>
  • Enter the ident (ID) of the channel you are interested in (for example, for TRK Ukraine, enter «0019D2»). To select a letter, press the channel selection buttons (channel+\-) on the remote. Then press «OK» =>
  • In the left column under the «Provider» heading, select the entered ident (for example, in our case «0019D2»). As a rule, the newly entered ident is at the end of the list =>
  • Press the WHITE BUTTON on the remote. Enter the key itself in the corresponding field. Then press «OK» =>
  • When exiting the menu (the «Back» button), the system will ask you to save the settings. Select «Yes».

If the channel does not open after all the manipulations, go to manual scanning and scan the frequency on which the desired channel is located. After that, the channel should start broadcasting.