Entering keys into the receiver may result in unforeseen consequences.
When editing the receiver's system data yourself, you can disrupt its software settings.
If you fail to enter Biss keys, or another coding system, we recommend contacting a specialist for proper tuning or reflashing the tuner.
This instruction is suitable for entering Biss keys into the Globo 4100 (4050, 7010) receiver and its clones, for example: Orton, Opticum, Eurosky, SkyPrime CX, Satcom dvb, Q-SAT ST-08,(09)... etc.
- To enter the key editor, while on any channel, press the following sequence of numbers on the remote control: «9339».
In the suggested list of encodings, select Biss.
If the Biss tab is missing, go to any other encoding and add a new key in it, changing only «CAID» to 2600, then press «OK» on the remote. After re-entering the key menu, the Biss column should appear. - The open list may already contain keys for other channels.
Some of them may not be used with your channel set. Therefore, instead of adding a new key, you can edit the unnecessary one.
It is worth noting that the bottom of this menu displays options for possible actions with the designation of the corresponding colored buttons on the remote control. - To edit the Biss code, select the line with the unused key and press the red button on the remote (do not confuse with the «on/off» button).
- If all keys are current, you should add a new one. To do this, press the green button.
- «CAID» leave unchanged (should be 2600)
- In the «ServId» column, enter the channel ID (in the Biss key table right column, for example, with ID:3 (0003) - enter «000003»)
- In the «Freq» field, enter the frequency at which the selected channel is broadcast, you can see it in the channel list.
- The «Type» parameter leave unchanged.
- Next, enter the Biss key itself, consisting of 8 pairs of characters. Enter the letters following the prompts at the bottom of the screen.
- After entering the Biss key correctly, you must press the central «OK» button on the remote, otherwise the key will not be saved.
- Exit this menu with the «EXIT» button. Go to the desired channel (if you were on it, you may need to go to any other channel, and then back to it). If everything is done correctly, the channel should work.